| OPTIONAL ACCESSORIES |
HM-118
Regular hand microphone |
HM-118T/TA
DTMF Microphone with keypad backlighting |
HM-133V
Remote control microphone with keypad backlighting |
SP-10
External Speaker |
OPC-440/OPC-647
MIC Extension Cable 5m (OPC-440)and 2.5m (OPC-647)
|
OPC-441
Speaker Extension Cable 5.0 m
|
OPC-1132/OPC-347
DC Power Cable
3m (OPC-1132) & 7m (OPC-347) |
OPC-589
Mic Adapter Cable |
UT-108
DTMF Decoder Unit |
UT-109
Voice Scrambler Unit V01 |
UT-110
Voice Scrambler Unit V01 |
CS-V8000
Cloning Software |
OPC-478
PC Cloning Cable |
OPC-474
Transceiver-to-Transceiver
Cloning Cable |
|
|
GENERAL
|
TRANSMITTER
|
Frequency range and supplied microphones (MHz)
Version CSA : TX 136-174 / RX 136-174 / HM133V
Version SEA : TX 140-150 / RX 136-174 / HM118N
Guaranteed range : 144-148 MHz only
|
Output power
|
75, 25, 10, 5 W selectable
|
|
Mode
|
FM (F3E, F2D)
|
Maximum frequency
deviation
|
±5.0 Khz
|
|
No. of memory channels
|
207 (including 6 scan edges, and 1 call channel)
|
Spurious emissions
|
Less than -60 dB
|
|
Operating temperature range
|
-10°C to +60°C
|
Microphone connector
|
8-pin modular (600 Ohm)
|
|
Frequency stability
|
±10ppm (-10°C to +60°C)
|
RECEIVER
|
|
Power supply requirements
|
13.8V DC ±15%
|
Receive system
|
Double-conversion superheterodyne
|
|
Current drain (at 13.8V)
|
TX HIGH (75W) - 15A
RX MAX AUDIO - 1A
RX STANDBY - 0.3A (typical, fan-OFF)
|
Intermediate frequencies
|
1st 21.7MHz
2nd 450KHz
|
|
Antenna connector
|
SO-239 (50 Ohm)
|
Sensitivity (at 12dB SINAD)
|
0.15 µV typical
|
|
Dimensions (W x H x D)
|
150 x 50 x 150 mm
|
Squelch sensitivity
|
0.08 µV typical (threshold)
|
|
|
|
Selectivity
|
More than 6KHz at -6dB
Less than 14KHz at -60dB
|
|
|
|
Spurious & image rejection
|
75dB typical
|
|
|
|
Intermodulation rejection
|
75dB typical
|
|
|
|
Audio output power
at 13.8V DC
|
More than 2.0W at 10% distortion with an 8 Ohm load
|
|
|
|
External speaker connector
|
3-conductor 3.5(d) mm / 8 Ohm
|
75W of output power