Large
Channel Capacity
In Trunked Mode, the 600-channel capacity can
handle all your trunked system requirements now and in the future should the network
expand. Each programmed system can be set for either conventional or trunked operation. In
Conventional Mode, the 250-channel capacity provides more than enough room for
company-wide, departmental, divisional requirements plus room for auxiliary or special-use
channels. |
Companded
Audio
The compandor noise-reduction feature enhances
audio clarity on narrow bandwidth systems and is programmable per channel. Voice
intelligence components are amplified and compressed at the transmit end then re-expanded
on the receive end to reproduce the original audio signal. |
High-Quality
Audio Output
A large 40mm speaker provides 500 mW audio
output. This enables the user to hear transmissions clearly even in the noisiest
environments. |
Dot
Matrix LCD Display
The high-resolution dot matrix liquid crystal
display furnishes the user with a simple easy-to-read interface and is recessed for
protection. The main display line has ten alphanumeric characters for system/group/channel
name aliases and two characters for operation/status indications. A three-character
sub-line can be programmed for channel or group number. The seven icons provide easy to
remember feature and status indications in all modes of operation. |
Built-in
QT and DQT Signaling
QT and DQT functions segregate talk groups so
users only hear calls from their own group for clearer, improved communications.
Selectable QT means the user can temporary change the QT frequency set for each channel. |
Multiple
Scanning functions
System scan and group scan permit monitoring
multiple systems and talk groups for calls. Priority scanning is available within
programmed conventional systems. Talk Back Scan permits users to respond immediately to
calls regardless of the pre-programmed or selected scan revert channels. Scan lists can be
altered with the Add/Delete features. |
DTMF
Signaling & Dialing features
DTMF PTT ID provides a built-in ANI for
business and industrial applications (operates on both keypad and non-keypad models). DTMF
keypad models add manual DTMF for selective calling, system access, remote control
applications and access to automatic dialing features such as the auto-dial memory for
telephone interconnect and/or integrated Radio-PBX systems. Also included are automatic
dialing features for telephone interconnect and/or PBX access such as auto-dial memory. |
Extra-long
battery life
The KNB-16A 1100mAh and KNB-17A 1500mAH
batteries deliver more than 8 and 10 hours of operating time respectively on a single
charge (5-5-90 duty cycle). |
Password
protected programming and cloning
Cloning enables duplicating of radios in the
field via a simple interface cable without the use of a PC or special test jigs. For users
who do not require cloning capability, a secure password can be programmed to prevent
cloning of a lost or stolen portable. Additionally, all radios can have the programming
password(s) protected to prevent unauthorized program information extraction and
duplication. |
Radio
Lock Password
Preventing unauthorized use of lost or stolen
portables, this feature requires an access code to be entered every time the radio is
powered up. This password - with a maximum of six digits - can be easily field programmed
or modified by an authorized user (keypad models only). |
Other
Features
* DTMF and 2-Tone (conventional mode only) *
High/Low power * Talk around * Busy channel lockout * Time Out timer * Low battery alert *
Minimum volume * Annunciation tone control |
Embedded
Message
The radio's flash memory can store an
electronic message containing owner identification, property ID numbers, user and
department names, service records, etc. A radio can be electronically identified even if
external labels, markings or factory serial numbers have been remover.
|
