FT-1000MP
FT-1000MP MARK V
ALL-MODE AMATEUR HF TRANSCEIVER
 

 

  

The FT1000MP is new HF masterpiece introducing new technology to amateur radio: Enchanced Digital Signal Processing; outstanding receiver section featuring Collins mechanical filters; clean and versatile transmitter; outstanding ergonomics.

Direct Digital Frequency synthesis
Two 10-bit and three 8-bit DDS are used in FT1000MP. Driven by single master TCXO these synthesizers produce fine tuning in 13 user-selectable steps down to 0.625 Hz. The multiple DDS system provides pure local signals which form the foundation of the outstanding receiver and transmitter performance.

Shuttle-jog Tuning Knob
The Shuttle-Jog Tuning Knob may be rotated in either direction and provides efficient QSY instead of spinning the VFO knob. The more the "jog" ring is moved from the centre, the progressive frequency steps increase. The Shuttle-Jog tuning steps and stepping speed are accessible from the Menu system.

EDSP
EDSP is operational both is receive and transmit modes. EDSP provides 4 random-noise reduction protocols, audio enhancement with 4 voice response equalization programs for both RX and TX, and an automatic notch filter which identifies and eliminates multiple interfering carriers or heterodynes.
Demodulation&Processing
For SSB, CW and AM, the receiver 3rd IF output is applied to a special 10.24 KHz EDSP IF for demodulation and processing. The selectable digital bandpass filters provide optimized bandwidth and frequency response.
Noise reduction
In addition to a highly-effective dual-mode IF noise Blanker, the FT1000MP boasts an EDSP Noise Reduction System with 4 noise reduction protocols to help with changing noise characteristics.
Contour Selections
Select Low, Mid, or High-cut responses or bandpass filters from the front panel.
Automatic multiple Notch Filters
The digital notch circuitry continually analyzes the AF passband and the correlation of the signals present, identifying and notching out heterodynes as they appear.
Other EDSP features:
- RX Audio Equalization
- TX Modulation and Equalization
- TX Bandpass filtering

 

 
Collins Filters
Collins Mechanical Filters operates at a center frequency of 455 KHz with a bandwidth of 2.75 KHz (500Hz Filter is optional).

Other features:
* Dual in-band receive
* Dual noise blankers
* AM Synchronous tuning
* Expanded Tuning Scale
* User-friendly Menu and Memory Systems
* Two independent VFOs; quick split
* Versatile Scanning
* Built-in CW electronic keyer
* CW Pitch control, Zero-beating tuning, sideband selection, tuning indicator on main display
* 3 Antenna connectors
* CAT System with built-in RS232C computer interface
* Optional Digital Voice Recorder DVS-2



New FT-1000MP MARK V features
- 200 watts PEP output - High-speed Automatic Antenna Tuner
- New revolutionary heatsink - Class "A" PA operation
- New FP- 29 switching power supply - Interlocked Digital Bandwidth Alignment Technique
- VRF Preselector Filtering Protects Receiver Front End - Low-noise Junction FET receiver front end
- Quick Access to VRF and IDBT Shuttle-Jog Tuning Ring - EDSP :
* Selectable Digital Product Detector
* Highly-Effective Noise Reduction
* Optimized Narrow-Bandwidth Filters
* Selectable SSB contour-pattern filters
* SSB Microphone equalizer
- Improved IF Notch Filter - Dual receive with independent AGC system
- CW Pre-programmed contest keyer with FH-1 keypad (optional)
OPTIONAL ACCESSORIES
MH-31b8
Hand microphone 		TCXO-4/TCXO-6
Master high-stability reference oscillators
TCXO-4 < ± 2 ppm
TCXO-6 < ± 0.5 ppm 		MD-100a8x
Desktop microphone with UP/DOWN switching ring, low-cut and high-emphasis filters
DVS-2
Digital Voice Recorder		 SP-8
External matching loudspeaker with
LL-7 Phone patch option		 YH-77STA
Lightweight Stereo headphones
IF Filter Options
8.2 Mhz (2nd IF)
YF-114SN - 2.0 KHz except AM&FM
YF-114CN - 250 Hz except AM&FM
455 KHz (3rd IF)
YF-110SN - 2.0 KHz except AM&FM
YF-115C Collins 500 Hz CW/RTTY
YF-110CN - 250 Hz for CW only
Sub-receiver
YF-115C Collins 500 Hz		 FH-1 (MARK V)
Remote Control Keypad